Sort by:
4 Hole Socket Adapter with Rotating Pyramid

4 Hole Socket Adapter with Rotating Pyramid

Overview Socket adapter with rotating pyramid adapter with borehole through the pyramid Specifications Material: Titanium, Stainless Steel Maximum Body Weight: 330 lbs (150 kg)  
SACH Foot

SACH Foot

Prosthetic SACH Foot. Imported. Best Quality.  Available Sizes 15cm-29cm. (Left & Right). 
Hinged Stabilizing Knee Brace

Hinged Stabilizing Knee Brace

Indications Recommended for use in processes of arthrosis, arthritis, bursitis and tendonitis. Two aluminium stays, one at right side and one at left side, supports the knee well
Articulated Knee Stabilizer

Articulated Knee Stabilizer

REF 833 Articulated Knee Stabilizer Indications Recommended for use in processes of arthrosis, arthritis, bursitis and tendonitis. Made up of 4 mm. neoprene. FEATURES NEOPRENE FEATURES   Inside the surface...
Knee Brace With Patella Support

Knee Brace With Patella Support

Knee Brace With Patella Support Indications Provides full circumference patellar control for chondromalacia, patellar tracking abnormalities and patellar tendonitis. Made up of 4 mm. neoprene. FEATURES NEOPRENE FEATURES   Inside...
701E43 Infrared heating cabinet for sheet materials

701E43 Infrared heating cabinet for sheet materials

The middle size in Ottobock's infrared oven series: The material cart offers a usable area of 920 mm x 720 mm. The 12 infrared quartz tubes are equipped with single...
701E40 Infrared heating cabinet for sheet materials, with rotatable material cart

701E40 Infrared heating cabinet for sheet materials, with rotatable material cart

All benefits at a glance Sensor for exact measurement of the material sag depth with acoustic and optical signal (only for models 701E40=S, 701E41=S and 701E44=S) Removable support plate Three...
Vacuum Forming Workstation

Vacuum Forming Workstation

Article No. 755T2 Dimensions: (W x D x H) 600 x 600 x 990 mm Material : Steel Weight : 45 Kg Color : Light Grey Article No. 755T2 Dimensions:...
Vacuum Forming Workstation With Integrated Pump (T55T6 =1 )

Vacuum Forming Workstation With Integrated Pump (T55T6 =1 )

Made to continue processing of heated material: The high-quality processing of the vacuum forming workstations is equipped to support orthopaedic technicians in modelling thermoplastics optimally. The vacuum is controlled with...
Vacuum Pump

Vacuum Pump

Motor with pump: The robust drive has been proven over years of everyday use and delivers a consistently high suction capacity.     Performance: The two separately controllable vacuum circuits deliver an...
3R80 Knee joint, monocentric, with rotation hydraulics

3R80 Knee joint, monocentric, with rotation hydraulics

3R80 Knee joint, monocentric, with rotation hydraulics As someone with a prosthesis, confidence in your knee joint throughout daily activities is key. That's why we've been dedicated to developing a...
3R92 Comfort-Brake Knee (pneumatic system)

3R92 Comfort-Brake Knee (pneumatic system)

Overview Same brake mechanism as the 3R90. The lower joint section is formed as a pneumatic cylinder. To control the swing phase, flexion and swing phase damping of the progressively...
3R95 Lightweight Hydraulic Knee

3R95 Lightweight Hydraulic Knee

Overview Small, lightweight and with powerful linear hydraulics for swing phase control. Particularly well suited for highly active users. Additional Features - The flexion and extension resistance used to control the...
3R55 Polycentric Hydraulic Knee Joint, Titanium

3R55 Polycentric Hydraulic Knee Joint, Titanium

Overview Upper and lower joint sections are connected to one another by linkage bars. Stance phase stability is achieved through polycentric kinematics. The swing phase is controlled by the built-in...
3R46 Polycentric Knee Joint for KD, Titanium

3R46 Polycentric Knee Joint for KD, Titanium

Overview The upper joint section and lower joint section with pyramid adapter are connected to one another by anterior and posterior linkage bars. The detachable lamination anchor connects the knee...
3WR95 Aqua Knee

3WR95 Aqua Knee

Overview The Aqua-Knee is water-resistant. It is small, light and equipped with a miniature hydraulic unit and a lock. Less active and unsure prosthesis users can activate the lock to...
Capital Knee - Hydraulic Knee Joint

Capital Knee - Hydraulic Knee Joint

The Capital is a hydraulic, single-axis knee joint that is easy to use for both patients and clinicians. Featuring smooth and responsive hydraulics during both swing and stance phase, this...
3R93 Modular Brake Knee Joint with Lock

3R93 Modular Brake Knee Joint with Lock

Overview The modern therapy knee joint The 3R93 is a monocentric knee joint with a load-dependent brake mechanism and an optional locking function. An integrated, adjustable extension assist spring controls...
Single Axis Knee Joint, Brake 3R15

Single Axis Knee Joint, Brake 3R15

Overview The swing block is connected to the upper joint section through the swing axis and with the lower joint section through the knee axis and acts as a load-dependent...
"Triac" Hot Air Gun

"Triac" Hot Air Gun

This Hot Air Gun (756E2) is used for professional welding, shrinking and molding various thermoplastics. It has continuously adjustable temperature and air flow. Temperature Range: 20 – 700 °C Air...
Electric Plaster Saw

Electric Plaster Saw

This cutter (756B12=230) has a powerful drive motor. It is equipped with speed controller for continuously variable pre-selection of the oscillating frequency. It includes one saw blade diameter 50 and 65...
Rechargeable Plaster Saw

Rechargeable Plaster Saw

This cutter (756B20=230) has powerful drive motor and rechargeable battery,  It comes with Rapid charger, 1700 mAh rechargeable battery, 1x saw blade (50 mm diameter), 1 saw blade (65 mm diameter)...
Replacement battery (625B10 ) for Plaster Saw

Replacement battery (625B10 ) for Plaster Saw

This is replacement battery for Plaster Saw( 756B20 = 230) Weight: 0.61 kg Battery Life: Approx. 30 min
Circular Saw Blade

Circular Saw Blade

This circular saw (756Y63)  blade is used for plaster saw 756B12=230 and 756B20=230  
Segment Saw Blade (for plaster saws)

Segment Saw Blade (for plaster saws)

This blade is used in  plaster saws 756B12=230 and 756B20=230 . Diameter of Blade : 65 mm Model Number : 756Y62
Electronic Two-Speed Hand Drill (701B5)

Electronic Two-Speed Hand Drill (701B5)

Anti-vibration system and soft grip for work that is easy on thejoints and does not cause fatigue clockwise and counter clockwise running Connecting Cable: 4 m cable with two-pin earthed...
Cordless Hand Drill

Cordless Hand Drill

Slim design with ergonomic handle , 1x rapid charger with "full battery" detector, 1x 12 V battery pack, 1x plastic case, continuously variable speed control, reversible rotation direction. Weight (with...
Angle Grinder

Angle Grinder

900 watt angle grinder, protective cover, supplementary handle, clamping set, 4 m power cable, disc diameter 125 mm, spindle lock for rapid disc replacement, dust-proof motor ,optimized cooling system for...
Electric Jigsaw

Electric Jigsaw

FIXTEC quick-clamping system for changing saw blades without the need for tools, quick-adjustment system for 45° bevel cuts, stable aluminium cast base plate for precision work,metal chip blower Model No...
Hand Sealing Iron

Hand Sealing Iron

Temperature control function, heating surface covered with Teflon welding tape, with pad Temperature Range: 100 – 180 °C Connecting Cable: 1.6 m with two-pin earthed plug Weight: 0.685 kg To...